Sunday, June 7, 2015

Leg Details

After finishing all the leg mortises and fitting the tenons, there was one more detail for the legs.  I decided to put an inlay on the front leg, with a design that's become kind of a "thing" in our house.  This is the first inlay I've done, so I took the time to make a couple of practice pieces before tackling the workbench leg.  I'll make a post soon on how that went, and the lessons I learned along the way.

The practice runs paid off, and the inlay on the leg turned out very well.

120 Days | 126 Hours

No comments:

Post a Comment

UA-58830821-1